Just Like That, I am Back

Image
 If I said I was back, would you believe me? Blogging is complicated, and there are so many "get rich quick" blogging schemes that make it look like you are a lost cause if you are not currently earning money blogging. And why are you even blogging if you don't have multiple streams of income and entertainment. If you don't have a brand? I do have this website, but I do not have Instagram, Twitter, TikTok (you don't want to see me dance), or whatever is next.  Heck, I haven't even updated this since before the pandemic. So why am I here, writing about being back and then, probably ghosting for another two years? Life has been rough. It's been painful and overwhelming. I am so thankful for you my readers, or what is left of you. I am so thankful you are reading this post. I am so thankful that you are still committed to making the world a more exciting and more sustainable place.  Keep up-cycling my friends, and you never know, I might be back again with an

Fat Quarter Bubble Skirt with Domestic Deadline

Greetings Stashbusters!  I'm so excited to be participating and grateful to Robin for hosting.  I'm Emily from Domestic Deadline and I see stashbusting as a way to take a different look at the supplies I already have on hand.  If you haven't guessed by now, I hoard fabric.  I can't pass up the remnant section at the craft store.  To me remnants and scraps can be put together like a fabric puzzle.  So, when my oldest asked for a bubble skirt after September 1st, it had to be done from my hoard stash!  There are several bubble skirt tutorials out there, and mine really isn't all that different... except for the fact that the fabric that met her red, white and blue requirements were a quarter of a yard or less!!!  This might work for a little one, but JuneBug, my 9-year-old is very skinny but fairly tall.  I'd like to introduce my


Fat Quarter Reversible Bubble Skirt


1.  Measure your recipient.  JuneBug has a 21 inch waist (and has for at least 3 years) and I like a length of 17 inches for skirts on her.  You will need 1 inch wide non roll elastic (waist size less 1 inch) and approximately 30 inches of 1/4 inch elastic (or in my case 1/8 inch was in the stash, went with it).  I'm assuming basic sewing knowledge here, but if you have any questions please ask!  My seam allowances are 1/4 inch



2.  Grab a few fat quarters in coordinating colors, I wanted mainly blue on one side (her fav color) and patriotic on the flip side.  When it comes to a traditional two color reversible bubble skirt I would use one piece that was standard width (about 44-45 inches selvage to selvage) with a length of 1.5 inches longer than my desired finished measurement (so for JuneBug, that would be 18.5 inches).  The second piece would be 3.5 inches longer than the first (21.5 in my case) *Note 18.5+21.5=40.  Sorry to be so wordy, but I figured I should explain the measurements so you understood how I pieced my fabric together.

3.  Cut those fat quarters down and sew them back up!  Fat quarters are typically 22x18 inches we need to turn them into about 44 inch long strips by whatever is left (would be about 9 inches, but apparently mine were partially used since I didn't have a full 18 inches, just go with it!).  Once I had strips of fabric that were (almost) 44 inches wide (give or take a bit of seam allowance), I sewed them all together, resulting in a 43 by 40* inches rectangle.  If you would like to top stitch, now is the time (yeah, just do it).

4.   Now we're going to sew that baby into a tube, sorry the above picture was the best I could do to show this, my photography skills aren't pro.

5.  Turn half of the tube onto itself, wrong sides in.  The swirly strip will be the bottom band on BOTH sides, the star pattern is the waist on both sides.  Iron a nice crisp crease into the bottom (my swirlies).

6A).  Just above the bottom edge, on the right side, we're going to sew almost all the way around (my scissors are acting as an arrow) wide enough to fit the 1/4 inch elastic.  6B).  Since you sewed almost all the way around, there should be an opening to feed the elastic through with a safety pin.  Please note, you have to reach in between the two layers since your finished piece will have no exposed raw edges.  6C).  Once your elastic is all the way through, decide how much you want the "bubble" to gather and sew the ends together.  Sew that opening closed.

7.  Congratulations you are almost done!  The last step is the waist band.  7A).  Fold over your waist band a quarter inch and iron.  Then fold it down and iron again, this time about 1.25 inches, covering the raw edges.  7B).  Stitch almost all the way around again, making a casing for your waist elastic.  Feed it through the opening, sew your elastic ends together and stitch the small opening closed.

8.  You're done!  If you work after the kids are in bed like me, leave it in her room to find it in the morning.  After you relish in her excitement, don't be too disappointed when she insists on wearing an old t-shirt with it, refuses to brush her hair again and just be glad she lets you take the pictures.  (Ignore the random waffle holding arm that tried to work his way into your picture).



In case you are looking for another stash busting project, when I started making my floor puffs, I ended up with this huge pile of scraps in strips.  I finally finished that stash... hop over and check out what I did with it...



Peace be with you,


Comments

Emily said…
Thanks again for having me!

Popular posts from this blog

Upcycled Mattress Board

Upcycled Awesome #10

Just Like That, I am Back